Isn’t molten salt just energy storage? Heat up salt when you have excess of energy, take heat out when you need it. The worst disaster there is just the container melting.
No, there are molten salt thermal batteries, but they aren’t the same as molten salt nuclear reactor. In a nuclear reactor the fissile material is dissolved in the salt for some reason, and the molten salt acts as a moderator or something. Apparently its safe because if the reactor power fails, the salt ‘freezes’ which prevents fission from occurring. Seems like complex extra steps to me but what do I know.
MSRs have negative temperature reactivity coefficient and outlet temps around 700C at atm pressure. PWR is at measly 300C and 150 Bar.
If all control is lost, the salt expands as it heats up pushing the expanded volume out from the reactor core. The fission stops once the fuel is leaves the core region where the moderator is. Reverse is also true: you pull heat off from the loop, so the fuel-salt becomes denser, increasing reactivity. MSRs can naturally “follow” the load, if done right.
Isn’t molten salt just energy storage? Heat up salt when you have excess of energy, take heat out when you need it. The worst disaster there is just the container melting.
No, there are molten salt thermal batteries, but they aren’t the same as molten salt nuclear reactor. In a nuclear reactor the fissile material is dissolved in the salt for some reason, and the molten salt acts as a moderator or something. Apparently its safe because if the reactor power fails, the salt ‘freezes’ which prevents fission from occurring. Seems like complex extra steps to me but what do I know.
“Can’t have a meltdown when you’ve already melted the fuel” is pretty much the whole idea there.
MSRs have negative temperature reactivity coefficient and outlet temps around 700C at atm pressure. PWR is at measly 300C and 150 Bar.
If all control is lost, the salt expands as it heats up pushing the expanded volume out from the reactor core. The fission stops once the fuel is leaves the core region where the moderator is. Reverse is also true: you pull heat off from the loop, so the fuel-salt becomes denser, increasing reactivity. MSRs can naturally “follow” the load, if done right.